Just to mention, I've merged the ANSI VT engine and putc4x6 to provide a crap text option where not available, at the moment I created an option for the ZX81 mid-resolution (udg) graphics and the EACA EG-2000.
The CFG file for the EG-2000, now provides two configuration options:
-clib=eg2000disk -> build a cmd file with EG-2000 graphics capabilities but standard TRS80 text
-clib=eg2000ansi -> build a cmd file for EG-2000 programs running totally in graphics, 40x16 emulated text with sound for the BEL case and text scrolling.
On the ZX81, -clib=udgansi -> emulates a 16x12 text window with fast scrolling. The display flashes for the BEL case (it now flashes also on all the other ANSI VT modes, both true text and text generated in graphics)
(classic) EACA 2000 VT engine
Re: (classic) EACA 2000 VT engine
This trick is useful in a limited number of cases, if the original text can be mixed with the pseudo-gaphics, then it is preferrable.
Very low resolutions aren't useful due to the too limited text resolution, e.g. 16x5 on the VZ200!
Is it worth to add a 4x4 font option?
Very low resolutions aren't useful due to the too limited text resolution, e.g. 16x5 on the VZ200!
Is it worth to add a 4x4 font option?
You do not have the required permissions to view the files attached to this post.